Surface cleaning
To remove stains and finger prints, please wipe the surface with the cloth enclosed in the box.
Do not use detergents or chemical products which could damage the pen’s materials.
|
| 1 |
Fountain pen with double-cartridge filling (figure 1)
1. Unscrew the end part of the barrel and remove the cartridge holder.
2. Take 2 cartridges.
3. Insert the first cartridge upside-down towards the end part of the barrel and then the other one,
facing in the opposite direction, until it clicks.
4. Reinsert the cartridge holder inside the pen.
5. Screw back the end part of the barrel so as to enable the ink to flow into the feeder.
6. The system works also without the reserve cartridge.We recommend using Montegrappa inks,
which have been developed to ensure the best operation of our pens.
When changing the ink colour, we advise first removing the cartridge holder and rinsing the nib under cold running water.
|
|
| 2 |
Changing the rollerball refill (figure 2)
When the intensity of the colour of the line decreases, it is necessary to replace the refill.
To replace it:
1. Unscrew the end of the pen.
2. Remove the old refill and insert the new one.
3. Screw back the end of the pen.
|
|
| 3 |
Changing the ballpoint refill (figure 3)
To replace:
1. Unscrew the end of the pen.
2. Remove the old refill and replace it with the new one.
3. Screw back the end of the pen.
|
|
 |
|
|
The system of opening/closing the cap.
Neither a click nor a screw, this rather recalls a curving, fluid movement like that of a car entering a fast chicane.
The little relief button on the section must be inserted in the groove inside the cap.
How to open the pen:
|
|
|
|
To close the pen, do the same in the opposite direction.
|
|
